Dichroic Alchemy Fireworks
*Originated by Kevin O'Grady
The most important things to remember during
Fireworks creation with BoroCoatingsTM
by Dichroic Alchemy are:
2.) Encase BoroCoatings with
a clear rod of 4-6mm on metal side of glass.
3B.) Hold strip 6-10 inches from tip of torch.
Start twisting while strip is pliable. DO NOT heat up the
strip so it is gooey hot, only heat to a degree of pliable
hotness. (Make sure oxygen mix is very rich.) When twisting-
twist slowly while keeping the glass fairly cool. After you
are done twisting there should be ridges that you can feel
from the twist. If you twist while the glass is too hot then
the needle matrix will distort.
To get the Dichroic Alchemy exclusive extreme
needle effect, use a BoroCoating from the wizard series like
the RD51 Starship/Tical rainbow BoroCoating and to get trichroic
effects use a color from the new Trichroic galaxy series.
|
